Choosing the Correct Stain and Sealer for Your Furniture

At times, the thought of furniture re-finishing appears to be an uphill task. This is further from the truth. However much it may seem complicated, it takes a little knowledge to make your furniture look new and shining. As with any improvement, proper planning and adequate preparation is the key to excellent results.

If you are preparing to make changes to your furniture, it will require some effort on your part to strip, sand, and restrain the furniture. Whether it’s a desk stain or a wood floor sealer, there are factors to consider before applying anything to your furniture to ensure excellent results. Let’s see what you need to watch out for before a new coat.

i. Weather

An aspect often ignored while re-finishing a new coat is the weather. If you are staining your furniture the best way is to ensure it’s thoroughly cleaned and dried. You don’t expect to dry your furniture on a rainy day. Additionally, drying is required for at least a day or two after treating your cabinets. It is advisable to avoid extreme weather conditions and conduct your re-finishing in a dry season.

ii. Type of wood

There are numerous varieties of wood used to make furniture, and each has its natural color that affects the ease of stripping and consequently the final color. Just knowing the color of your wood does not make it simple. The type of finish you apply is affected by the wood density. Whether the wood is soft or hard ultimately affects how it absorbs the finish. Furthermore, the wood grain is an also a factor to keep in mind when purchasing your wood finish.

iii. Know your requirement

Are you in need of a wood stain or a sealer? While both the coats aim to protect the wood, they also serve different needs. While stains highlight the color of your furniture, sealers bring the unique grains to shine. Most of the time both are mixed and applied to form a protective sealant. However, before you go ahead and make your final decision, always take time to read the manufacturer’s instruction to know what you should use in your work.

iv. Timing

Patience pays. However much you deny this is a textbook rule for finishing. If you need good final results, then it matters you give your stain and sealer time to sip through the wood properly. While flat surfaces take less time in applying, detailed furniture equipment like chairs, cabinets among others require adequate application time and proper approach. 

A Final Thought:

Whether you choose a sealer or stain, the application process should regularly be held to ensure a long-lasting wood furniture. It’s better to be protected rather than replace the whole furniture. While you can do the finishing yourself, you can always hire a professional to help you out. However, if you take a hands-on approach, do research and understand your furniture needs. There is no need to haste the process, as a decent looking re-finished piece is worth the wait.